Universal Wheelchair Armrest Pad in Vinyl - Desk Length (9 Inch)

The universal replacement Wheelchair Armrest Pad in Vinyl. This desk length armrest features premium textured vinyl and foam for durability and all-day comfort.

Product Features

• Features textured vinyl for a premium look and feel.
  
• Thick high-density foam measuring just over 1 1/2” thick at the center for maximum durability and comfort.
• Quality plastic base with metal threaded screw sleeves.
• Universal design fits most wheelchairs with desk length armrest pads (9” – 10.5”).
• Measures approx. 9 1/4" length and 2 1/8" wide
• Fits any wheelchairs with 3-5/16" or 5.5" hole spacing (Center to center of bolt measured)
• Hardware (2 screws) included measuring 1 1/4" in length attaching to 3/4", 7/8", and 1" tubing.
  
• Sold individually (each). For a pair, please order a quantity of 2.

Fitment Notes:
Designed as a replacement or upgrade for an existing wheelchair desk length armrest from a variety of wheelchair manufacturers including Invacare, Drive, Medline, Everest and Jennings (E&J), Guardian, Nova. Tuffcare, Breezy, or any other wheelchair manufacturer that uses a basic 9” to 10.5” armrest pad on their wheelchair model. The easiest way to know if this wheelchair desk length armrest pad will work on your wheelchair is to flip over your existing armrest pad and match one set of holes shown below measuring center to center (it comes with all three sets of holes). The overall size of your existing armrest pad should be 9” to 10.5”.

Compatibility
This Wheelchair Armrest Pad has a universal fit and works with many wheelchairs. It is also a replacement for the following:

• Drive Medical STDSDSKVB
• Drive Medical STDS2A1824
• Drive Medical TC00508
• Drive Medical STDSSSDDAR
  
• Drive Medical STDS2004BLK
• Medline WCA806915BLK
• Medline WCA806915RBY
• Medline WCA806915NVY
• Medline WCA806915SLG
• Nova YU-506019
• Nova L7000DP
• Breezy (Sunrise) 561024
• Sunrise GEY-2APD
• Invacare 8881127510
• Pride Mobility SETLRAM1182
• Dalton ZE15-A1124PBKV
• Dalton ZE-A1124PBK

Installation Tips:
Installation requires only a Phillips-head screwdriver.

1. Remove or flip up the wheelchair armrest side panel, depending on the wheelchair model.
2. Access the two screws securing the existing armrest pad.
3. Remove the old armrest pad.
4. Position the replacement pad and align the appropriate mounting holes.
5. Install the supplied screws and tighten securely.

For wheelchairs with fixed armrest side panels, carefully lay the wheelchair on its side to access the mounting screws.