Nylon Seat Back Upholstery for Invacare and Compatible Wheelchairs (18 Inch)

The 18" Nylon Seat Back for Invacare and Compatible features foam padding for comfort, is easy to install, and fits many wheelchairs from Invacare (including the Tracer) plus models from Drive, Medline, Theradyne, IAC, Sunmark, and Evermed.

Product Features

• Approx. 1/2 in. foam padding for comfort
  
• Made from durable black nylon
  
• 18 in. High, with 3 widths to choose from
• Hardware included
  
• Latex free
  
• Sold individually (each)

Fitment notes:
The Nylon Seat Back Upholstery fits many manual wheelchairs from Invacare (including the Invacare Tracer), Medline, Drive, Theradyne, JAC, Sunmark, and Evermed. Available sizes for this wheelchair seat are 16" wide x 18" high, 18" wide x 18" high, and 20" wide x 18" high. Select the correct size when adding to the shopping cart.

Matching Wheelchair Seat:
The matching Nylon seat for Invacare and Most Manual Wheelchairs can be found here: Nylon Seat Upholstery for Invacare and Most Manual Wheelchairs (16 Inch).

Choosing the right wheelchair upholstery size
All you need is the width, depth or height, and the hole spacing. Measure the width of your wheelchair seat with the wheelchair completely unfolded. For the wheelchair seat, note the depth and for the wheelchair seat back, note the height. Next measure the distance between the holes that secure the seat or back (measuring from hole center to hole center). See image below.

Installation Tips
Fold up the wheelchair seat slightly to reduce the tension on the upholstery. Unscrew the existing nylon seat and pull off. Re-install new nylon wheelchair seat with provided screws and grommets. It is normal for the upholstery to feel a little firmer once the wheelchair is unfolded as it is new unworn nylon.

Wheelchair Nylon Seat Back with 5 in. Center Bolt Pattern for Invacare and Compatible
DIYUB4379, DIYUB4579, DIYUB4779