6201Z Precision Wheelchair or Scooter Bearing (12x32x10 mm)

The 6201Z Precision Wheelchair or Scooter Bearing (12x32x10 mm) is known to fit some Drive Medical wheelchairs including the Drive Infinity model.

Product Features

• Maintenance free design and pre-greased
  
• High quality double shielded design keeps grease in and contaminants out
  
• Replacement for bearing reference numbers 6201Z, 6201ZZ, 6201RS, 6201-2RS
  
• Inside Diameter (bore): 12 mm (.4724)
  
• Outside Diameter: 32 mm (1.12598 in.)
  
• Width (thickness): 10 mm (.3937 in.)
  
• Sold individually (each)

Fitment Notes:
It is important to verify your bearing reference number before ordering as there are several bearings with reference numbers starting with 6201. The difference will be the inside diameter(bore) as the other 6201 bearings share the outside diameter and the width (thickness). If the reference number is not visible, you'll have to remove the bearing and look at the other side or you may have to measure. Known to fit some Drive Wheelchairs including the Drive Infinity model.

The 6201RS Precision Wheelchair or Scooter Bearing can be used as a replacement for the following manufacturer part numbers:

• Drive STDS2A3410

General Wheelchair and Scooter Bearing Notes:
Many bearings found on wheelchairs and scooters have a alpha numeric reference or just a numeric reference number stamped on the side of the bearing which refers to the type and size of the bearing. In most cases, that is all you need to purchase the correct bearing. For alpha numeric reference numbers ending in Z, ZZ, RS, or 2RS, they are all interchangeable (Z and ZZ refer to a metal outer side shield and RS and 2RS refer to a rubber outer side shield protecting the balls inside the bearing). If your bearing has no reference on it, you will have to measure. If the bearing reference appears worn off, you may be able to see it stamped on the other side. Click the "Fitment" tab for more information on how to identify or measure your bearing.